Vanne papillon d'eau Elephant WBV3232P-2W-Fb-H, matériau du corps - acier inoxydable AISI 316L, matériau du disque - acier inoxydable AISI 316L, joint - PTFE, avec actionneur pneumatique double effet PA-DA, 4V320-08 220V, BKV APL-210N
Vanne papillon d'eau Elephant WBV3232P-2W-Fb-H, matériau du corps - acier inoxydable AISI 316L, matériau du disque - acier inoxydable AISI 316L, joint - PTFE, avec actionneur pneumatique double effet PA-DA, 4V320-08 220V, BKV APL-210N - DN100 / 16 bars está agotado y se enviará tan pronto como vuelva a estar disponible.
No se ha podido cargar la disponibilidad de recogida
Entrega y envío
Entrega y envío
El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.
Descripción
Descripción
The butterfly valve is designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
Pneumatic double-acting rotary actuators PA-DAXXX and pneumatic rotary actuators with return spring PA-SA-XXX are designed for automation of industrial valve control process with maximum torque up to 2128 Nm.
The pneumatic valve is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.
The limit switch unit is designed for visual and electrical signaling of the end positions of the valve shut-off device: valve, crane or disk gate. It is mounted on top of the pneumatic actuator surface and connected to the actuator shaft in DIN standard. The sealed box usually contains two sensors, which monitor the position of the actuator shaft and signalize in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. The visual indication of the position can be observed on the housing of the unit there is a 3D visual indicator RED-CLOSED and GREEN-OPEN.
Technical parameters of Water Butterfly Valve Elephant WBV3232P-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - PTFE, with pneumatic actuator double action PA-DA, 4V320-08 220V, LSU APL-210N:
| Nominal diameter DN, mm | 40 - 300 |
| Nominal pressure PN, bar | 16 |
| Flow direction | double-sided |
| Working medium temperature t, ⁰C | -20 to +85 for NBR |
| -20 to +120 for EPDM | |
| -10 to +180 for PTFE | |
| Ambient temperature t, ⁰C | -40 to +120 |
| Working medium | EPDM: cold and hot water, air without impurities of oil and grease, other media neutral to the material |
| PTFE: water, alkalis, acids, solvents and oxidizers | |
| NBR: water, mineral oils, hydrocarbons, | |
| oils, fats | |
| Connection to pipeline | interflange |
Butterfly valves WBV3232P-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - PTFE, with pneumatic actuator double action PA-DA, 4V320-08 220V, LSU APL-210N
Dimensions and dimensions of butterfly valves Elephant WBV3232P-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - PTFE, with pneumatic actuator double action PA-DA, 4V320-08 220V, LSU APL-210N:
| DN | L, mm | ØC, mm | B1, mm | C, mm | E, mm | B, mm | H2, mm | H, mm |
| 40 | 33 | 110 | 153 | 30 | 72 | 56 | 110 | 77 |
| 50 | 45 | 125 | 174 | 36 | 89 | 76 | 162 | 77 |
| 65 | 48 | 145 | 174 | 36 | 89 | 89 | 175 | 77 |
| 80 | 49 | 160 | 174 | 36 | 89 | 89 | 175 | 77 |
| 100 | 55 | 180 | 216 | 46 | 109 | 114 | 200 | 77 |
| 125 | 58 | 210 | 216 | 46 | 109 | 127 | 213 | 77 |
| 150 | 59 | 240 | 279 | 55 | 134 | 140 | 225 | 77 |
| 200 | 64 | 295 | 308 | 67.5 | 157 | 177 | 260 | 77 |
| 250 | 70 | 355 | 405 | 76 | 174 | 203 | 292 | 77 |
| 300 | 80 | 410 | 405 | 76 | 174 | 242 | 337 | 77 |
Sketch Butterfly valves WBV3232P-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - PTFE, with pneumatic actuator double action PA-DA, 4V320-08 220V, LSU APL-210N
Materials of butterfly valves Elephant WBV3232P-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - PTFE, with pneumatic actuator double action PA-DA, 4V320-08 220V, LSU APL-210N:
| № | Name | Material |
| 1 | Body | Stainless steel AISI 316L |
| 2 | Cuff | PTFE |
| 3 | Disk | Stainless steel AISI 316L |
| 4 | Stem | Stainless steel AISI 316L |
| 5 | Stud | Stainless steel AISI 316L |
| 6 | Sleeve | PTFE |
| 7 | O-ring | NBR (nitrile) |
| 8 | plate | Carbon steel |
Sketch of parts and materials Butterfly valves WBV3232P-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - PTFE, with pneumatic actuator double action PA-DA, 4V320-08 220V, LSU APL-210N
Technical data of PA-DA pneumatic actuators:
| Design | Double action |
| Nominal pressure PN, bar | 12 |
| Working pressure, bar | 2...8 |
| Working medium | Filtered compressed air or non-aggressive gases, oils |
| Maximum particle diameter | less than 30 µm2 |
| Operating temperature t, ⁰C | - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air) |
| Adjustment range | ± 5 ° for rotation at 0 ° and 90 ° |
| Manual override | is |
| Position indicator | open/closed |
| Operating environment | indoors and outdoors. (All internal and external parts are anti-corrosion coated) |
PA-DA pneumatic actuator
PA-DA pneumatic actuator component materials:
| № | Name | Material |
| 1 | Enclosure | extruded aluminum |
| 2 | Side plugs | cast aluminum |
| 3 | Gear | stainless steel |
| 4 | Piston | steel/aluminum |
| 5 | Plugs | stainless steel |
| 6 | Piston ring | NBR |
| 7 | Springs | spring steel |
| 8 | Piston bearing | engineering plastic |
| 9 | Piston ring | NBR |
| 10 | Plug | NBR |
| 11 | Thrust ring | engineering plastic |
| 12 | Ring | engineering plastic |
| 13 | Washer | stainless steel |
| 14 | Spring clip | stainless steel |
| 15 | Indicator | plastic |
| 16 | Indicator housing | plastic |
| 17 | Bearing | engineering plastic |
| 18 | Cam | steel |
| 19 | Bearing | NBR |
| 20 | Bearing | engineering plastic |
| 21 | Bearing | engineering plastic |
| 22 | Sealing ring | NBR |
| 23 | Sealing ring | NBR |
| 24 | Bearing | stainless steel |
| 25 | Adjustment nut | stainless steel |
| 26 | Adjustment screw | stainless steel |
| 27 | Sleeve | aluminum |
Parts and material sketch of the PA-DA pneumatic actuator
Technical parameters of pneumatic valve 4V320-08 220V:
| Name | meaning |
| Type of pneumatic valve | slide valve |
| Working pressure, bar | 1.5 ÷ 1.8 |
| Supply voltage, V | 220 V |
| Total power, Va | 4.5 |
| Control | double-sided electromagnetic |
| Frequency of operation, cycle/sec | 5 |
Pneumatic valve 4V320-08 220V
Dimensions and dimensions of pneumatic valve 4V320-08 220V:
| Pneumatic valve model | 4V320-08 |
| A, mm | 71.9 |
| B, mm | 45 |
| C, mm | 94.4 |
| D, mm | 27 |
| E, mm | 69 |
| F, mm | 40 |
| I, mm | 24 |
| K, mm | 40 |
| L, mm | 188.8 |
| M, mm | 69.4 |
| N, mm | 50 |
| O, mm | 82.4 |
| P, mm | 24 |
| S, mm | 20 |
| T, mm | 6.5 |
| U, mm | 2.4 |
| V, mm | 4 |
| H, mm | 82.4 |
Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V
Technical parameters of limit switch unit APL-210N:
| Name | Value |
| Model of limit switch unit | APL-210N |
| Maximum voltage of limit switch, V | 250 |
| Working environment temperature, °C | -40 to +80 |
| Service life, years | 10 |
Limit switch unit APL-210N
Dimensions and dimensions of the APL-210N limit switch unit:
| Model | H, mm | L, mm | B, mm | D, mm | D1, mm | M |
| APL-210N | 77 | 112 | 88 | 10 | 5 | 20x1.5 |
Sketch of dimensions and dimensions of limit switch unit APL-210N
Especificaciones
Especificaciones
-
País de origen
-
Temperatura máxima permitida
-
Tipo de conexión
-
Tipo de sello
-
Material del disco
-
Anulación manual
-
Interruptores de límite
-
Sensor de retroalimentación
-
Tensión de alimentación
-
Tipo de actuador neumático
Reseñas (0)
Reseñas (0)
Limit switch unit ELEPHANT APL-210N
Pneumatic valve ELEPHANT 4V320-8 or 10 AC220V
Butterfly valve Elephant WBVx32x-2W-Fb-H DN40-300 16 bar
Pneumatic rotary actuator ELEPHANT PA-x-x double-acting and with return springsPago y seguridad
Métodos de pago
Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Preguntas frecuentes
Envío
¿A qué países realizan envíos?
¿A qué países realizan envíos?
Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.
¿Cuánto tiempo tardaré en recibir mi pedido?
¿Cuánto tiempo tardaré en recibir mi pedido?
El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).
Devoluciones y reembolsos
¿Cómo devuelvo un producto?
¿Cómo devuelvo un producto?
Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.
¿Cuánto tiempo tardaré en recibir mi reembolso?
¿Cuánto tiempo tardaré en recibir mi reembolso?
Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.
