Elephant | SKU: D160-39618

Ball valves Elephant BV3232P(2pc)-FP-F-ISO-H DN15-150 flanged, full bore, two-piece, stainless steel body. steel SS316, seal - PTFE, with pneumatic actuator Elephant PA-SA 052-210 pneumatic distributor 4V320-08 ATU AFC2000 APL-510N-EX

€2.279,62

Impuestos incluidos. Los gastos de envío se calcularán al momento de pagar.

Connection size

Pressure

Variantes del producto

Entrega y envío

El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.

Si tiene alguna pregunta sobre nuestros productos, opciones de envío o cualquier otra cosa, no dude en comunicarse con nosotros.

Descripción

The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.

Pneumatic actuators PA-SA are designed to automate the process of controlling industrial shut-off valves - valves, ball valves. Pneumatic actuators Elephant are designed for use both indoors and outdoors. All internal and external parts have an anti-corrosion coating.

Pneumatic distributors 4V320-08 220 V are used for control in pneumatic systems with a NAMUR mating surface for installing distributors through through holes in the housing.

The AFC2000 air preparation unit is designed to clean compressed air from droplet moisture and solid particles, remove condensate, automatically maintain the pressure at a given level, supply lubricant from the tank to the compressed air flow to the pneumatic system elements with a large range of throughput from 500 liters/minute to 10,000 liters/minute. The lubricator (oil sprayer) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic distributors.

The Elephant APL-510N-EX limit switch unit is an electrical device designed to open and close the working circuit and to visualize the positions of the shut-off element of pipeline valves. As a rule, a sealed box contains two mechanical switches rated for up to 250 V, which monitor the position of the actuator rod and signal in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color hemisphere of the visual indicator. If the connected pipeline valve is closed, then only the red part of the hemisphere with the inscription CLOSED is visible; if open, only the yellow part with the inscription OPEN. This visual indicator is clearly visible from afar, which simplifies the inspection of the equipment, and the color difference between the open and closed positions reduces the likelihood of erroneous perception of information. Thanks to the use of the LSU, it becomes possible to transmit information about the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics when faults are detected.

Technical data of ball valves Elephant BV3232P(2pc)-FP-F-ISO-H PA-SA 4V320-08 220V APL-510N Ex AFC2000

Nominal diameter DN, mm	40 – 300
Nominal pressure PN, MPa (kg/cm2)	1.6 (16)
Direction of flow	bilateral
Temperature of working environment t, ⁰C	-20 to +85 for NBR -20 to +120 for EPDM -10 to +180 for PTFE
Working environment	EPDM: cold and hot water, air without impurities of oil and fat, other environments neutral to the material PTFE: water, alkalis, acids, solvents and oxidizers NBR: water, mineral oils, hydrocarbons, oils, fats
Connection to the pipeline	interflange

Sketch of detailing of ball valves Elephant BV3232P(2pc)-FP-F-ISO-H PA-SA 4V320-08 220V APL-510N Ex AFC2000

Materials of parts of ball valves Elephant BV3232P(2pc)-FP-F-ISO-H PA-SA 4V320-08 220V APL-510N Ex AFC2000

No.	Detail	Material
1	Frame	stainless steel SS316
2	Ball seal	RPTFE
3	Ball	stainless steel SS316
4	Bolt	stainless steel SS304
5	Sealing	PTFE
6	screw	stainless steel SS304
7	Pipe branch	stainless steel SS316
8	Stock	stainless steel SS316
9	Seal	PTFE
10	Rod seal	PTFE
11	Seal	stainless steel SS304
12	screw	stainless steel SS304
13	Lever	stainless steel SS316, PVC

Sketch of ball valves Elephant BV3232P(2pc)-FP-F-ISO-H PA-SA 4V320-08 220V APL-510N Ex AFC2000

Overall and installation dimensions of ball valves Elephant BV3232P(2pc)-FP-F-ISO-H PA-SA 4V320-08 220V APL-510N Ex AFC2000

DN	d, mm	D, mm	D1, mm	D2, mm	C, mm	t, mm	L, mm	W, mm	H, mm	H1, mm	A, mm	B, mm	KxK (rod)	N-∅Z, pcs-mm
15	15	95	65	45	16	2	115	127	79	8	36	42	9х9	4-∅14
20	20	105	75	58	18	2	120	127	83	9	36	42	9х9	4-∅14
25	25	115	85	68	18	2	125	165	94	14	42	50	11х11	4-∅14
32	32	140	100	78	18	2	130	165	115	15	42	50	11х11	4-∅18
40	38	150	110	88	18	3	140	186	115	17	50	70	14х14	4-∅18
50	50	165	125	102	20	3	150	186	120	20	50	70	14х14	4-∅18
65	65	185	145	122	19	3	170	260	151	22	70	102	17х17	4-∅18
80	76	200	160	138	21	3	180	321	158	21	70	102	17х17	8-∅18
100	99	220	180	158	21	3	190	321	188	20	70	102	17х17	8-∅18

Technical data of SA pneumatic actuators with return springs:

Type of pneumatic actuator	SA - with return springs
Nominal pressure PN, bar	12
Working pressure, bar	2...8
Working medium	filtered compressed air
Maximum particle diameter of the working medium, µm2	≤30
Ambient temperature, ⁰C	-20 to +80
Swivel angle, °	0 - 90
Swivel angle adjustment, %	±5
Position indicator	open/closed
Top connection standard	NAMUR
Air connection standard	NAMUR
Average life, cycles closed/open	70 000 (for non-aggressive media and medium pressure and temperature values)

SA pneumatic actuators rotary with return springs

Dimensions and mounting dimensions of SA pneumatic actuators with return springs:

Model	A, mm	B, mm	C, mm	D, mm	E, mm	F, mm	G, mm	H, mm
PA-x-052	30	41,5	65,5	72	92	65	30	80
PA-x-065	36	47	81	88	108	72	30	80
PA-x-083	46	57	98,5	108,7	128,7	92	30	80
PA-x-105	57,5	64	122,5	133	153	109,5	30	80
PA-x-130	67,5	74,5	145,5	155	185	127,5	30	130
PA-x-140	75	77	161	172	202	137,5	30	130
PA-x-160	87	87	184	197	227	159	30	130
PA-x 210	113	113	235,5	255	285	210	30	130
PA-x-270	147	147	299	326	356	273	30	130
PA-x-300	162	174	330	350	380	312	30	130
PA-x-350	190	195	483	410	440	365	30	130

Model	A, mm	B, mm	C, mm	D, mm	E, mm	F, mm	G, mm	H, mm
PA-x-052	30	41,5	65,5	72	92	65	30	80
PA-x-065	36	47	81	88	108	72	30	80
PA-x-083	46	57	98,5	108,7	128,7	92	30	80
PA-x-105	57,5	64	122,5	133	153	109,5	30	80
PA-x-130	67,5	74,5	145,5	155	185	127,5	30	130
PA-x-140	75	77	161	172	202	137,5	30	130
PA-x-160	87	87	184	197	227	159	30	130
PA-x 210	113	113	235,5	255	285	210	30	130
PA-x-270	147	147	299	326	356	273	30	130
PA-x-300	162	174	330	350	380	312	30	130
PA-x-350	190	195	483	410	440	365	30	130

Sketch of dimensions of SA pneumatic actuators with return springs

Materials of parts of SA pneumatic actuators with return springs:

№	Part name	Material
1	Indicator screw	ABS plastic
2	Position indicator	ABS plastic
3	Spring clip	stainless steel 304
4	Metal washer	stainless steel 304
5	Pressure washer	engineering plastic
6	Housing	hard anodized extruded aluminum alloy
7	Pressure washer	engineering plastic
8	Limiter	alloy steel
9	Shaft sealing ring upper	NBR
10	Upper shaft sliding ring	engineering plastic
11	Shaft	nickel plated alloy steel
12	Shaft sliding ring lower	engineering plastic
13	Shaft O-ring lower	NBR
14	Plug	NBR
15	Seal ring of adjusting screws	NBR
16	Washer of adjusting screw	stainless steel 304
17	Lock nut of adjusting screw	stainless steel 304
18	Adjusting screw	stainless steel 304
19	Piston	die-cast aluminum alloy
20	Piston guide plate	engineering plastic
21	Piston sliding ring	engineering plastic
22	Piston O-ring	NBR
23	Spring set	spring steel
24	Cover O-ring	NBR
25	End cap	cast aluminum with polyester coating
26	Cover screw	stainless steel 304
27	Stop screw	stainless steel 304
28	Adapter	carbon steel

Material sketch of SA pneumatic actuators with return springs

Technical characteristics of the pneumatic distributor 4V320-08 220 V

Name	Meaning
Type of pneumatic distributor	spool valve
Body material	aluminum alloy and technopolymer
Control	two-way electromagnetic
Scheme of work	5/2 5 working lines; 2 positions
Effective cross-sectional area, mm2	model 4V320-8 – 25 (Cv = 1.4) model 4V320-10 – 30 (Cv = 1.68)
Thread of working ports	model 4V320-8 – G 1/4" model 4V320-10 – G 3/8"
Exhaust port thread	model 4V320-8 – G 1/4" model 4V320-10 – G 1/4"
Working pressure, bar	1.5 ÷ 8
Maximum pressure, bar	12
Working environment	purified air (filtration fineness 40 microns)
Supply voltage, V	220
Full power, VA	4.5
Permissible changes in supply voltage	±10%
Degree of protection/insulation class	IP65/F
Operating temperature, °C	from -5 to +50
Maximum response frequency	5 cycles per second
Minimum switching time, s	0.05
Flow rate, l/min	model 4V320-8 – 1,350 model 4V320-10 – 2,250
Average resource, cycles	20,000,000
Weight, kg	1,2

Main parameters of the air preparation unit AFC2000

Working pressure, bar	8
Maximum pressure, bar	10
Adjustable pressure range, bar	0.5 ÷ 9
Destruction pressure, bar	15
Air connection	1/4"
Operating temperature, C	from -5 to +60
Size of filtered particles, µm	40
Oil viscosity	ISO VG 32
Weight, kg	0.395
Kit composition	filter-moisture separator, pressure regulator, lubricator, bracket

Characteristics of the APL-510N-EX limit switch unit

Parameter	Meaning
Frame	Weatherproof IP67/ NEMA4 4X,7,9 Explosion Proof E EX d IIC T6
Compatible devices	- quarter-turn pneumatic actuators; - any actuators with a shaft rotation of 90°
Full rotation angle	90°
Cable entries	2 x NPT 3/4”
Electrical connection	screw clamp terminals 8 points (0.08 – 2.5) mm2
Cable entry thread	2 x NPT 3/4”
Visual indicator type	two-color hemisphere: OPEN - yellow CLOSED - red
Switches/sensors	two mechanical switches two proximity sensors
Nominal voltage, V	250
Nominal current, A	16
Permissible ambient temperature, °C	from -20 to +66
Average resource, cycles	10,000,000
Weight, kg	1.8

Especificaciones

País de origen

China
Apertura de puerto

full bore
Temperatura máxima permitida

200 °C
Tipo de conexión

Flanged
Entorno operativo

Water, Steam, Oil Products, Liquid Media, Neutral Media, Gaseous Media
Tipo de sello

PTFE
Interruptores de límite

have
Tipo de actuador neumático

spring loaded

Reseñas (0)

Documentación

Air treatment unit AFC2000 ELEPHANT

Limit switch unit ELEPHANT APL-510N EX explosion-proof

Pneumatic valve ELEPHANT 4V320-8 or 10 AC220V

Pneumatic rotary actuator ELEPHANT PA-x-x double-acting and with return springs

Pago y seguridad

Métodos de pago

Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

Variantes disponibles

SKU	Connection size	Pressure	Precio	Disponibilidad	Cantidad
D160-39619	DN100	16 bar	€1.729,51	0 Disponibles	Qty
D160-39618	DN125	16 bar	€2.279,62	Agotado	Qty
D160-39627	DN15	40 bar	€401,33	Agotado	Qty
D160-39617	DN150	16 bar	€3.004,50	Agotado	Qty
D160-39626	DN20	40 bar	€649,84	Agotado	Qty
D160-39625	DN25	40 bar	€615,64	Agotado	Qty
D160-39624	DN32	40 bar	€731,90	Agotado	Qty
D160-39623	DN40	40 bar	€758,73	Agotado	Qty
D160-39622	DN50	40 bar	€802,41	Agotado	Qty
D160-39621	DN65	16 bar	€955,19	Agotado	Qty
D160-39620	DN80	16 bar	€1.179,29	Agotado	Qty

Preguntas frecuentes

Envío

¿A qué países realizan envíos?

Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.

¿Cuánto tiempo tardaré en recibir mi pedido?

El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).

Devoluciones y reembolsos

¿Cómo devuelvo un producto?

Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.

¿Cuánto tiempo tardaré en recibir mi reembolso?

Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.