Vanne papillon d'eau Elephant WBV1632E-2W-Fb-H, matériau du corps - fonte QT450, matériau du disque - acier inoxydable AISI 316L, joint - EPDM, actionneur pneumatique PA-DA double action, 4V320-08 220V, BKV APL-510N EX, BPV AFC2000
Vanne papillon d'eau Elephant WBV1632E-2W-Fb-H, matériau du corps - fonte QT450, matériau du disque - acier inoxydable AISI 316L, joint - EPDM, actionneur pneumatique PA-DA double action, 4V320-08 220V, BKV APL-510N EX, BPV AFC2000 - DN100 / 16 bars está agotado y se enviará tan pronto como vuelva a estar disponible.
No se ha podido cargar la disponibilidad de recogida
Entrega y envío
Entrega y envío
El costo de envío se determina durante el proceso de pago y varía según varios factores, incluido el tipo de producto, el tiempo de entrega, el proveedor de servicios y el país de destino.
Descripción
Descripción
The WBV1632E-2W-Fb butterfly valve is designed for use as a shut-off or control valve to control flows in heat supply systems, water supply, in technological processes in the food, chemical, oil and gas, pulp and paper and other industries. Operating principle: The valves open and close by turning the disk by 90°. Opening is performed by turning the handle counterclockwise, closing - clockwise.
Pneumatic actuators PA-DA are designed to automate the process of controlling industrial shut-off valves - valves, ball valves. Elephant pneumatic actuators are designed for use both indoors and outdoors. All internal and external parts have an anti-corrosion coating.
Pneumatic distributors 4V320-08 220V 220V are used for control in pneumatic systems with a NAMUR mating surface, for installing distributors through through holes in the body.
The AFC2000 air preparation unit is designed to clean compressed air from droplet moisture and solid particles, remove condensate, automatically maintain the pressure at a given level, supply lubricant from the tank to the compressed air flow to the pneumatic system elements with a large range of throughput from 500 liters/minute to 10,000 liters/minute. The lubricator (oil sprayer) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic distributors.
The APL-510N EX limit switch unit is designed for visual and electrical signaling of the end positions of the valve shut-off element. It is installed on top of the surface of the pneumatic drive and connected to the drive shaft - DIN standard. In a sealed box, as a rule, there are two sensors that track the position of the drive shaft and signal in extreme positions. Visual indication of the position can be observed on the body of the unit there is a 3D visual indicator RED - CLOSED and YELLOW - OPEN.
Technical characteristics of butterfly valves Elephant WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, pneumatic actuator PA-DA double action, 4V320-08 220V, APL-510N EX, AFC2000
Parameter | Meaning |
Nominal diameter DN, mm | 40 - 300 |
Nominal pressure PN, bar | 16 |
Temperature of working environment t, ⁰C | from -20 to +110 |
Working environment |
water, steam, aggressive environments and liquids with abrasive content (cement, sand, alumina, etc.) |
Direction of flow | bilateral |
Control type |
DN40-200 - handle DN250-300 - reducer |
Connection to the pipeline | interflange |
Body material | cast iron QT450 |
Seal material | EPDM with wear-resistant coating |
Service life, years | 10 |
Sketch of parts of rotary disc valves Elephant WBV1132N-2W-Fb DN40-300 PN16
General details and materials of butterfly valves Elephant WBV1132N-2W-Fb DN40-300 PN16
No. | Part name | Material |
1 | Frame | cast iron QT450 |
2 | Disk | Stainless steel 316L |
3 | Saddle seal |
EPDM + wear-resistant material (siliclone+graphite) |
4 | Stock | steel 2Cr13 |
Sketch of dimensions of butterfly valves Elephant WBV1132N-2W-Fb DN40-300 PN16
General weight and dimensions of the Elephant WBV1132N-2W-Fb butterfly valves DN40-300 PN16
DN | L | H | H1 | D2 | D1 | n.d. |
DN40 | 43 | 147 | 70 | 92 | 125 | 4- Ø23 |
DN50 | 43 | 147 | 70 | 92 | 125 | 4- Ø23 |
DN65 | 46 | 155 | 76 | 110 | 145 | 4- Ø23 |
DN80 | 46 | 164 | 92 | 121 | 160 | 8- Ø20 |
DN100 | 52 | 175 | 106 | 153 | 180 | 4- Ø23 |
DN125 | 56 | 194 | 119 | 176 | 210 | 4- Ø23 |
DN150 | 56 | 206 | 132 | 207 | 240 | 4- Ø25 |
DN200 | 60 | 237 | 162 | 259 | 295 | 4- Ø25 |
DN250 | 68 | 282 | 200 | 316 | 355 | 4-Ø28 |
DN300 | 78 | 311 | 225 | 370 | 410 | 4-Ø28 |
Sketch of pneumatic actuator parts Elephant PA-DA
General parts and materials of pneumatic actuators Elephant PA-DA
No. | Detail | Quantity | Material |
1 | Frame | 1 | extruded aluminum |
2 | Side plugs | 2 | cast aluminum |
3 | Gear | 1 | stainless steel |
4 | Piston | 2 | steel/aluminum |
5 | Plugs | 8 | stainless steel |
6 | Piston ring | 2 | NBR |
7 | Springs | 0-12 | spring steel |
8 | Piston bearing | 2 | engineering plastic |
9 | Piston ring | 2 | NBR |
10 | Plug | 2 | NBR |
11 | Thrust ring | 2 | engineering plastic |
12 | Ring | 1 | engineering plastic |
13 | Washer | 1 | stainless steel |
14 | Spring clamp | 2 | stainless steel |
15 | Indicator | 1 | plastic |
16 | Indicator housing | 1 | plastic |
17 | Bearing | 1 | engineering plastic |
18 | Cam | 1 | steel |
19 | Bearing | 1 | NBR |
20 | Bearing | 1 | engineering plastic |
21 | Bearing | 1 | engineering plastic |
22 | Sealing ring | 2 | NBR |
23 | Sealing ring | 2 | NBR |
24 | Bearing | 2 | stainless steel |
25 | Adjusting nut | 2 | stainless steel |
26 | Adjustment screw | 2 | stainless steel |
27 | Sleeve | 2 | aluminum |
Sketch of dimensions of pneumatic actuators Elephant PA-DA
General weight and dimensions parameters of pneumatic actuators Elephant PA-DA
Model | A, mm | B, mm | C, mm | G, mm | d1 | d2 | J | TO | Mmm | N, mm | Weight, kg |
Elephant PA-DA-052 | 153 | 71 | 98 | 15 | F03 | F05 | 4-M5x8 | 4-M6x10 | 80 | 30 | 1,2 |
Elephant PA-DA-065 | 174 | 82 | 115 | 15 | F05 | F07 | 4-M6x10 | 4-M8x12 | 80 | 30 | 1.9 |
Elephant PA-DA-083 | 216 | 101 | 135 | 15 | F05 | F07 | 4-M6x10 | 4-M8x12 | 80 | 30 | 3.2 |
Elephant PA-DA-105 | 279 | 119 | 160 | 25 | F07 | F10 | 4-M8x12 | 4-M10x16 | 80 | 30 | 6.1 |
Elephant PA-DA-130 | 308 | 137.5 | 193 | 25 | F07 | F10 | 4-M8x12 | 4-M10x16 | 80 | 30 | 9.5 |
Elephant PA-DA-140 | 405 | 153 | 210 | 30 | F10 | F12 | 4-M10x16 | 4-M12x20 | 130 | 30 | 13.7 |
Elephant PA-DA-160 | 465 | 175 | 237 | 30 | F10 | F12 | 4-M10x16 | 4-M12x20 | 130 | 30 | 20.5 |
Elephant PA-DA-210 | 542 | 226 | 295 | 40 | / | F14 | / | 4-M12x20 | 130 | 30 | 41.8 |
Elephant PA-DA-270 | 722 | 292 | 371 | 52 | / | F16 | / | 4-M20x24 | 130 | 30 | 86.3 |
Elephant PA-DA-300 | 825 | 335 | 392 | 52 | / | F16 | / | 4-M20x24 | 130 | 30 | 103 |
Elephant PA-DA-350 | 866 | 385 | 448 | 52 | / | F16 | / | 4-M20x24 | 130 | 30 | 144 |
Technical characteristics of the pneumatic distributor 4V320-08 220V 220V
Name | Meaning |
Type of pneumatic distributor | spool valve |
Body material | aluminum alloy and technopolymer |
Control | two-way electromagnetic |
Scheme of work |
5/2 5 working lines; 2 positions |
Effective cross-sectional area, mm2 |
model 4V320-8 – 25 (Cv = 1.4) model 4V320-10 – 30 (Cv = 1.68) |
Thread of working ports |
model 4V320-8 – G 1/4" model 4V320-10 – G 3/8" |
Exhaust port thread |
model 4V320-8 – G 1/4" model 4V320-10 – G 1/4" |
Working pressure, bar | 1.5 ÷ 1.8 |
Maximum pressure, bar | 12 |
Working environment |
purified air (filtration fineness 40 microns) |
Supply voltage, V | 220 |
Full power, VA | 4.5 |
Permissible changes in supply voltage |
±10% |
Degree of protection/insulation class | IP65/F |
Operating temperature, °C | from -5 to +50 |
Maximum response frequency | 5 cycles per second |
Minimum switching time, s | 0.05 |
Flow rate, l/min |
model 4V320-8 – 1,350 model 4V320-10 – 2,250 |
Average resource, cycles | 20,000,000 |
Weight, kg | 1,2 |
Sketch of the AFC2000
Main parameters of the air preparation unit AFC2000
Working pressure, bar | 8 |
Maximum pressure, bar | 10 |
Adjustable pressure range, bar | 0.5 ÷ 9 |
Destruction pressure, bar | 15 |
Air connection | 1/4" |
Operating temperature, C | from -5 to +60 |
Size of filtered particles, µm | 40 |
Oil viscosity | ISO VG 32 |
Weight, kg | 0.395 |
Kit composition | filter-moisture separator, pressure regulator, lubricator, bracket |
Limit Switch Block Elephant APL-510N EX
Characteristics of the limit switch unit Elephant APL-510N EX
Parameter | Meaning |
Frame |
Weatherproof IP67/ NEMA4 4X,7,9 Explosion Proof E EX d IIC T6 |
Compatible devices |
- quarter-turn pneumatic actuators; - any actuators with a shaft rotation of 90° |
Full rotation angle | 90° |
Cable entries | 2 x NPT 3/4” |
Electrical connection | screw clamp terminals 8 points (0.08 – 2.5) mm2 |
Cable entry thread | 2 x NPT 3/4” |
Visual indicator type | two-color hemisphere: OPEN - yellow CLOSED - red |
Switches/sensors | two mechanical switches two proximity sensors |
Nominal voltage, V | 250 |
Rated current, A | 16 |
Permissible ambient temperature, °C | from -20 to +66 |
Average resource, cycles | 10,000,000 |
Weight, kg | 1.8 |
Especificaciones
Especificaciones
-
País de origen
-
Temperatura máxima permitida
-
Tipo de conexión
-
Entorno operativoWater, Steam, Aggressive Media, Abrasive Media
-
Tipo de sello
-
Material del disco
-
Anulación manual
-
Interruptores de límite
-
Tensión de alimentación
-
Tipo de actuador neumático
Reseñas (0)
Reseñas (0)
Documentación
Documentación





Pago y seguridad
Métodos de pago
Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
Preguntas frecuentes
Envío
¿A qué países realizan envíos?
¿A qué países realizan envíos?
Actualmente ofrecemos envíos dentro de Francia y en toda la UE, así como opciones de envío internacionales. Si tienes un destino específico en mente que no está en la lista, no dudes en contactarnos para obtener más información.
¿Cuánto tiempo tardaré en recibir mi pedido?
¿Cuánto tiempo tardaré en recibir mi pedido?
El envío estándar suele tardar entre 3 y 7 días. El envío al día siguiente está disponible para todos los pedidos nacionales (por un cargo adicional). Los tiempos de envío internacionales dependen de los productos y el destino (se calculan al finalizar la compra).
Devoluciones y reembolsos
¿Cómo devuelvo un producto?
¿Cómo devuelvo un producto?
Los artículos deben devolverse dentro de los 30 días posteriores a la recepción del pedido. Los artículos deben devolverse en las mismas condiciones en las que se recibieron, sin usar, con las etiquetas aún adheridas e incluir todo el embalaje original.
¿Cuánto tiempo tardaré en recibir mi reembolso?
¿Cuánto tiempo tardaré en recibir mi reembolso?
Los reembolsos se procesan dentro de los 7 días posteriores a que recibimos los artículos.